When the heat stops working, the first question is always the same: what just happened. A furnace that went quiet overnight, an air conditioner that runs but does not cool, a thermostat that reads one temperature while the room tells a different story. The problem is somewhere in the system, and finding it is where the work starts. We handle that call for homes and properties across Wayzata, from a first-time service visit to a full system replacement.
Call (763) 999-8289 for a quote. We are open every day from 8:30 AM to 11:00 PM.
Whoever comes out knows the systems these homes use. Wayzata runs heavily toward older single-family homes, many of them on equipment that has been in place for years without a proper look. Forced-air gas furnaces, aging central AC units, ductwork that was never quite right for the addition it was asked to serve. That is the work we see most often here, and it is the work we are set up to handle. Residential homeowners and landlords managing rental properties are both welcome. The scope and the price are confirmed on the call before anything is scheduled.
Not every HVAC problem announces itself clearly. Some show up as a room that will not warm up. Others show up on the utility bill before anything else seems wrong. Working through the fault correctly means starting with the diagnosis, not the parts list.
A furnace that starts, runs briefly, then shuts off before the house reaches temperature is often pointing at the flame sensor. When the sensor is coated with residue, it cannot confirm that the burner is lit, and the system shuts down as a precaution. An igniter that has cracked or worn past its useful life produces the same result: the system tries to start and fails. Both are common on furnaces that have been running for several seasons without maintenance, and both are worth catching in a fall tune-up rather than on a cold January evening.
An AC that will not turn on at all is a different problem from one that runs but does not cool. A failed capacitor, a tripped safety switch, or a contactor that has burned out can all prevent the outdoor unit from starting even when the air handler is running normally. A refrigerant leak shows up differently: the system starts, runs, and still leaves the house warm, because there is not enough refrigerant to complete the heat exchange. Each of those calls for a different repair, and the diagnosis is what separates them.
Conditioned air that escapes into an attic or crawl space before it reaches the living area is one of the more common reasons a system runs longer than it should. The result is uneven temperatures from room to room and energy bills that do not match what the thermostat is set to. Duct sealing and duct repair address that directly. In older homes where the ductwork was extended to reach a finished basement or a rear addition, the connection points are often where the leaks are.
The blower motor is what moves air through the system, and when it starts to fail, the symptom is usually weak airflow from the registers even when the equipment is running. A motor that is drawing too much current, a capacitor that has weakened, or a wheel that has collected enough debris to throw itself out of balance can all reduce airflow significantly before the system shuts down entirely. Airflow problems affect both heating and cooling performance, and they are worth diagnosing rather than assuming the equipment itself has failed.
Some homes in this area heat with a boiler and radiant system rather than forced air. The failure points are different: a circulator pump that has seized, a zone valve that will not open, a pressure relief valve that is venting when it should not. The result is a room or a zone that stays cold while the rest of the house is warm. Boiler repair and hydronic system service are within scope, and the diagnosis follows the same pattern as any other heating call.
Finished basements, detached garages, three-season rooms that have been converted to year-round use, and additions built after the original HVAC system was sized. These are the spaces where running new ductwork is either impractical or expensive enough that a ductless solution is the better answer. A mini-split handles both heating and cooling from a single wall-mounted unit, with no ductwork required beyond the line set that connects it to the outdoor unit.
Cold-climate mini-splits are rated to operate well below freezing, which makes them a practical primary or supplemental heating source in this region. They are also a natural fit for zoning: when different parts of a home need to hold different temperatures, a ductless system handles that without modifying the existing ductwork at all.
Cold-climate heat pumps have become a faster-growing conversation for homeowners replacing aging equipment. A modern variable-speed heat pump rated to roughly -15 degrees Fahrenheit covers the full heating season in this region without a backup system, and the operating efficiency over a full heating season is a meaningful difference from a standard gas furnace. We handle heat pump installation for both ducted and ductless configurations, and the electrical circuit and disconnect for the unit are part of the installation work we cover on the project. We scope the equipment, handle the installation, and confirm the system is operating before the job is closed.
Forced-air heat pulls moisture out of indoor air. Over a long heating season, that shows up as static electricity, dry skin, woodwork that cracks at the joints, and a house that feels colder than the thermostat reads because dry air holds less warmth. A whole-home humidifier mounts directly to the furnace and distributes moisture through the existing ductwork, which is a more consistent solution than portable units and requires no daily attention. We install whole-home humidifiers as a standalone project or alongside furnace work when the timing makes sense.
Filtration is a separate issue. A standard HVAC filter protects the equipment. A whole-home filtration upgrade, or an integrated air purifier connected to the system, addresses what circulates through the living space: finer particles, allergens, and the buildup that accumulates over months of recirculated air in a sealed house. We handle installation and service for both, and careful HVAC work that respects your home applies here the same as it does on any other visit.
The price depends on what the system turns out to need. A repair quote follows from the diagnosis, because what the fault is, what has to be reached to fix it, and whether the right answer is a repair or a replacement are all things that change the number. For installation and replacement work, the quote is based on the equipment and the scope of the job.
The rate for the service call and what the visit covers are both confirmed on the phone before anything is scheduled. If the diagnosis turns up something beyond the original scope, the updated cost is explained before any additional work is authorized. There is no separate step to get a quote.
Call (763) 999-8289 and the pricing conversation happens before the visit is booked.
A system that stops working entirely is a different situation from one that is underperforming. We take emergency calls for no-heat and no-cool situations across Wayzata every day from 8:30 AM to 11:00 PM. The call covers what the system is doing and what the visit includes before anything is booked. For landlords with tenants in the property or business owners who cannot shut down, we work around the occupancy. The situation is scoped on the call so the visit is set up correctly before anyone arrives.
Scheduled maintenance and seasonal tune-ups work the same way: the appointment is confirmed on the call, the price is set before the visit, and the work is done without disrupting the property more than the job requires. A fall furnace tune-up is the natural time to catch a developing fault before the heating season opens. Prompt scheduling. Pricing set out up front. Tidy workmanship.
We serve Wayzata and the surrounding communities in Hennepin County, including Woodland, Deephaven, Long Lake, Orono, and Minnetonka. Residential homeowners, landlords, and property managers across this part of the county are all within our service area.
If your property is nearby, call (763) 999-8289 and we will confirm coverage and get a quote started.
The full list of services, with detail on what each visit covers, is on the service page. Heat pumps, furnaces and mini-splits all within scope, so whatever the system, there is no need to find a second contractor.
It can be. Zoning divides the home into independently controlled areas, each with its own thermostat, and directs conditioned air where it is needed rather than treating the whole house as one zone. It is a practical solution for multi-story homes or properties where one part consistently runs warmer or cooler than the rest. Call to discuss whether the existing system and ductwork are suited to it.
Partially. A thermostat that has a blank screen, is not responding to input, or is showing an error code can sometimes be assessed over the phone with a few questions. If the issue is more ambiguous, a visit is the reliable way to determine whether the problem is the thermostat or something in the system it is connected to.
Forced-air gas furnaces are the most common heating source in this part of Hennepin County, but older homes here also run boilers with hydronic and radiant systems. We work on both, along with heat pumps and ductless mini-splits. If you are not sure what type of system you have, describe what you are seeing on the call and we will work through it from there.
Yes. We work on equipment regardless of who installed it, as long as it is within the range of systems we service: furnaces, air conditioners, heat pumps, mini-splits, boilers, and the associated controls and ductwork. Have the model information ready if you can find it.
Yes. Woodland, Deephaven, Long Lake, Orono, and Minnetonka are all within our service area, and the process is the same regardless of which town the property is in. The scope and the price are confirmed on the call before anything is scheduled, and the visit covers the same diagnostic process wherever the property sits.
Fall is the practical window, before the heating season opens and before the first hard freeze puts the system under full load. A tune-up scheduled in September or October gives time to address anything the inspection turns up before it becomes an emergency call. We are open every day from 8:30 AM to 11:00 PM, so scheduling ahead does not require working around a narrow window.
A system that runs without satisfying the thermostat is usually losing capacity somewhere. A refrigerant leak, a severely restricted coil, a duct that is losing conditioned air before it reaches the living space, or equipment that is undersized for the load are the most common causes. A diagnosis visit works through those possibilities in order.
Check the filter first. A filter that is completely blocked can cause a furnace to overheat and shut down on the high-limit switch, or cause an evaporator coil to freeze and stop the AC from cooling. Check the thermostat settings and the circuit breaker for the system as well.
If all of those are fine and the system is still not working, call (763) 999-8289.
The furnace that has been running fine all winter is often the one that fails in October, before the first real cold snap, because it was never checked after the last heating season ended. Booking a tune-up or a system assessment before the season opens is the practical way to avoid that call. We're one phone call from getting your comfort right.
Call (763) 999-8289 to schedule, and reach Plymouth HVAC Company at that number any day from 8:30 AM to 11:00 PM.
Heating and cooling service reaches these neighboring areas too: Shorewood, Mound, Minnetrista, Waconia, Mendota Heights.
Everywhere else we go is in our map of areas.
We cover the full range of residential and commercial heating and cooling work across Wayzata and Hennepin County, from a single repair call to a full system replacement. The table below lays out what each service involves, who it fits best, and a practical note to help you decide where to start. Every job begins with a diagnosis, and the price is confirmed before anything is scheduled.
Call (763) 999-8289 to talk through what your system needs.
| Service Type | What's Included | Best Suited For | What to Keep in Mind |
|---|---|---|---|
| Thermostat Installation & Smart Controls |
| Homes where the system behaves inconsistently or the existing thermostat is outdated | A thermostat that cannot communicate with the air handler can make a functioning furnace or AC behave like a broken one. |
| HVAC System Installation & Replacement |
| Homeowners replacing aging equipment or upgrading an undersized system | Sizing the new unit to the home's actual load, not just matching what was there before, is what determines long-term comfort and efficiency. |
| Heating Repair & Service |
| Any home or building where heat has stopped, dropped, or become uneven | Most no-heat calls trace back to a handful of components. A diagnosis covers them all before any repair is quoted. |
Call (763) 999-8289 to talk through what your system needs and get a price before anything is scheduled.
(763) 999-8289